View 2SC1568_314792.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power Transistors
2SC1568
Silicon NPN epitaxial planar type
Unit: mm
For low-voltage type medium output power amplification Complementary to 2SA0900 (2SA900) I Features
* Low collector to emitter saturation voltage VCE(sat) * Satisfactory operation performances and high efficiency with a low-voltage power supply * TO-126B package which incorporates a unique construction enabling installation to the heat sink without using insulation parts
8.0+0.5 -0.1 3.160.1
3.80.3 11.00.5
3.20.2
1.90.1
I Absolute Maximum Ratings TC = 25C
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature Note) *: Without heat sink
*
0.750.1 4.60.2
0.50.1 0.50.1 1.760.1 2.30.2 3
Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg
Rating 18 18 5 2 1 1.2 150 -55 to +150
Unit V V V A A W C C
1 2
16.01.0
1 : Emitter 2 : Collector 3 : Base TO-126B Package
I Electrical Characteristics TC = 25C
Parameter Collector cutoff current Symbol ICBO ICEO Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio VCBO VCEO VEBO hFE1 * hFE2 Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance Note) *: Rank classification Rank hFE1 Q 90 to 155 R 130 to 210 S 180 to 280 VCE(sat) VBE(sat) fT Cob Conditions VCB = 10 V, IE = 0 VCE = 18 V, IB = 0 IC = 10 A, IE = 0 IC = 1 mA, IB = 0 IE = 10 A, IC = 0 VCE = 2 V, IC = 500 mA VCE = 2 V, IC = 1.5 A IC = 1 A, IB = 50 mA IC = 500 mA, IB = 50 mA VCB = 6 V, IE = -50 mA, f = 200 MHz VCB = 6 V, IE = 0, f = 1 MHz 150 12 18 18 5 90 50 100 0.5 1.2 V V MHz pF 280 Min Typ Max 1 10 Unit A A V V V
Note)The part number in the parenthesis shows conventional part number.
3.050.1
1
2SC1568
PC T a
6 1.2 (1)With a 100x100x2mm Al heat sink (2)Without heat sink Class B push pull TC=25C 1.0 1.0
Power Transistors
IC VCE
1.2 VCE=2V TC=25C
IC I B
Collector power dissipation PC (W)
5
Collector current IC (A)
4 (1) 3
0.8
IB=5.0mA 4.5mA 4.0mA
Collector current IC (A)
2.0
0.8
0.6
3.5mA 3.0mA 2.5mA 2.0mA 1.5mA 1.0mA 0.5mA
0.6
2 (2)
0.4
0.4
1
0.2
0.2
0 0 40 80 120 160 200
0 0 0.4 0.8 1.2 1.6
0 0 2 4 6 8 10 12
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base current IB (mA)
VCE(sat) IC
Collector to emitter saturation voltage VCE(sat) (V)
Base to emitter saturation voltage VBE(sat) (V)
IC/IB=20 10 10
VBE(sat) IC
IC/IB=10 1000
hFE IC
VCE=2V
Forward current transfer ratio hFE
TC=100C 300 -25C 100 25C
3
3 TC=100C -25C 0.3 25C
1
1
0.3 25C
TC=100C -25C
30
0.1
0.1
10
0.03
0.03
3
0.01 0.01
0.03
0.1
0.3
1
3
0.01 0.01
0.03
0.1
0.3
1
3
1 0.01
0.03
0.1
0.3
1
3
Collector current IC (A)
Collector current IC (A)
Collector current IC (A)
f T IE
200 175 150 125 100 75 50 25 0 -1 VCB=6V f=200MHz TC=25C 50
Cob VCB
104 IE=0 f=1MHz TC=25C 40 103
ICBO Ta
VCB=10V
Collector output capacitance Cob (pF)
Transition frequency fT (MHz)
30
ICBO (Ta) ICBO (Ta=25C)
1 3 10 30 100
102
20
10 10
0 -3 -10 -30 -100
1 0 20 40 60 80 100 120 140 160
Emitter current IE (mA)
Collector to base voltage VCB (V)
Ambient temperature Ta (C)
2
Power Transistors
ICEO Ta
105 VCE=18V 10 3 ICP
2SC1568
Area of safe operation (ASO)
Single pulse TC=25C
Collector current IC (A)
104
1 0.3 0.1 0.03 0.01
t=10ms IC DC t=1s
ICEO (Ta) ICEO (Ta=25C)
103
102
10 0.003 1 0 20 40 60 80 100 120 140 160 0.001 0.1
0.3
1
3
10
30
100
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
3
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SC1568

	To Download 2SC1568 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .